CAUTION
For safety reasons, these route-setting functions
are not available while your vehicle is in motion.
To enable these functions, you must stop in a
safe place and put on the handbrake before set-
ting your route.
p
Some information regarding traffic regula-
tions depends on the time when the route
calculation is performed. Thus, the infor-
mation may not correspond with a certain
traffic regulation when your vehicle actually
passes through the location in question.
Also, the information on the traffic regula-
tions provided will be for a passenger vehi-
cle, and not for a truck or other delivery
vehicles. Always follow the actual traffic
regulations when driving.
The basic flow of creating
your route
1
Park your vehicle in a safe place and apply
the handbrake.
j
2
Display the
“
Destination Menu
”
screen.
=
For details of the operations, refer to
j
3
Select the method of searching for your
destination.
j
4
Enter the information about your destina-
tion to calculate route.
j
5
Confirm the location on the map.
=
For details, refer to
j
6
The navigation system calculates the route
to your destination, and then shows the
route on the map.
j
7
Check and decide the route.
=
For details, refer to
j
8
Your navigation system sets the route to
your destination, and the map of your sur-
roundings appears.
j
9
Release the handbrake, drive in accordance
with navigation guidance.
Engb
29
Chapter
06
Searc
hing
for
and
selecting
a
location
Searching for and selecting a location
