Pioneer AVIC-F80BT, Operation Manual

Page: 57 / 80

57
Displaying the “Audio” setting
screen
1 Press the button.
2 Touch , and then
.
Using fader/balance adjustment
1 Display the “
Audio
” setting screen.
 Refer to Displaying the “
Audio
” setting screen on page 57
2 Touch [ Fader/Balance ].
p
Only the balance can be adjusted when “ On ” is selected in
“ Rear Speaker ”. Touch [ Balance ] and skip to step 4.
 Refer to Setting the rear speaker output on page 57.
3 Touch or to adjust the front/rear speaker
balance.
p
Set “ Front ” and “ Rear ” to “ 0 ” when using a dual speaker
system.
4 Touch or to adjust the left/right speaker
balance.
 You can also set the value by dragging the point
on the displayed table.
Switching sound muting/
attenuation
You can automatically mute or attenuate the AV source volume
and the iPhone or smartphone application volume when the
navigation outputs the guidance voice.
The default setting is “ ATT ”.
1 Display the “
Audio
” setting screen.
 Refer to Displaying the “
Audio
” setting screen on page 57
2 Touch [ Mute Level ].
3 Touch the item.

ATT
:
The volume becomes 20 dB lower than the current volume.

Mute
:
The volume becomes 0.

Off
:
The volume does not change.
Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of
each source to prevent radical changes in volume when switch-
ing between sources.
p
Settings are based on the FM tuner volume level, which
remains unchanged.
p
This function is not available when the FM tuner is selected
as the AV source.
1 Compare the FM tuner volume level with the
level of the source.
2 Display the “ Audio ” setting screen.
 Refer to Displaying the “ Audio ” setting screen on page 57
3 Touch [ Source Level Adjuster ].
4 Touch or to adjust the source volume.
p
If you directly touch the area where the cursor can be moved,
the
SLA
setting will be changed to the value of the touched
point.
p
“
+4
” to “
–4
” is displayed as the source volume is increased
or decreased.
p
The default setting is “
0
”.
Setting the rear speaker output
A rear speaker output of this product can be turned on or off.
The default setting is “
On
”.
1 Display the “ Audio ” setting screen.
 Refer to Displaying the “ Audio ” setting screen on page 57
2 Touch [ Rear Speaker ] to switch “ On ” or “ Off ”.
p
If “ Off ” is selected, the rear speaker adjustment is not availa-
ble in “
Speaker Level
”, “
Time Alignment
” and “
Crossover
”.
Setting the subwoofer output
This product is equipped with a subwoofer output mechanism,
which can be turned on or off.
The default setting is “ On ”.
1 Display the “ Audio ” setting screen.

Refer to Displaying the “ Audio ” setting screen on page 57
2 Touch [
Subwoofer
] to switch “
On
” or “
Off
”.
p
If “
Off
” is selected, the rear speaker adjustment is not availa-
ble in “ Speaker Level ”, “ Time Alignment ” and “ Crossover ”.
Adjusting the cutoff frequency
value
You can adjust the cutoff frequency value of each speaker.
The following speakers can be adjusted:
Front , Rear , Subwoofer
p
“ Rear ” is available only when “ Rear Speaker ” is set to “ On ”.

Refer to Setting the rear speaker output on page 57
p
“ Subwoofer ” is available only when “ Subwoofer ” is set to
“ On ”.
 Refer to Setting the subwoofer output on page 57
1 Display the “ Audio ” setting screen.
 Refer to Displaying the “ Audio ” setting screen on page 57
2 Touch [ Crossover ] or [ Subwoofer Settings ].
3 Touch [<] or [>] to switch the speaker.
4 Drag the graph line to set the cutoff position.
5 Drag the lowest point of the graph to set the
cutoff slope.
p
The following items can also be set.

⁂⁚⁓⁥⁗
:
Switches the subwoofer phase between normal and reverse
position.

LPF
/
HPF
:
Switches the LPF / HPF setting to “ On ” or “ Off ”.
When it is turned off, the high-pass filter or low-pass filter of
each speaker can also be turned on by touching the graph
lines.
Selecting the listening position
You can select a listening position that you want to make as the
centre of sound effects.
The default setting is “ Off ”.
1 Display the “ Audio ” setting screen.

Refer to Displaying the “ Audio ” setting screen on page 57
2 Touch [
Listening Position
].
3 Touch the desired position to change the lis-
tening position.
The following items are available:
Off , Front-L , Front-R , Front , All .
Audio adjustments
 Speed Pulse
The speed pulse value detected by this product is shown.
 Illumination
Displays the status of headlights or small lamps of the
vehicle.

Back Signal
When the gearstick is shifted to “R” (reverse position), the
signal switches to “
High
” or “
Low
”. The signal displayed will
vary depending on the vehicle.
57 < CRB4783-A >
System settings Audio adjustments