25
Car Shuttle Trains
When this function is turned off, the route is calculated prioritiz-
ing the avoidance of car shuttle trains.
Car shuttle trains are used to transport vehicles for relatively
short distances and they usually connect places that are not
easily accessible by road.
Unpaved Roads
When this function is turned off, the route is calculated prioritis-
ing the avoidance of unpaved roads.
p
The navigation system avoids unpaved roads by default.
“Sound” settings
p
The following settings marked with an asterisk (*) are
enabled only when a TTS-voice is selected for the voice
language.
Voice
You can adjust the volume of the guidance sounds (verbal
instructions).
Alert Beeps
You can adjust the volume of the non-verbal alert sounds
(beeps).
Ding
You can turn off the attention tone that precedes the verbal
instructions or adjust its volume.
Voice Guidance
You can enable or disable voice guidance.
p
This function is enabled by default.
Announce Streets and Roads in Native
Language Area*
You can select whether to have the navigation system announce
the street names in the native language of the area, only the road
numbers, or only the manoeuvres.
Announce Streets and Roads in
Foreign Language Area*
You can select whether to have the navigation system read the
street names in a foreign country, only the road numbers, or only
the manoeuvres.
Early Indication of Maneuvers
You can select whether you want an immediate announcement
for the next manoeuvre or to receive the information when the
manoeuvre is near.
Verbosity Level
You can set the verbosity of the voice instructions: how much
information is given and how often the prompts occur.
Minimal
: Voice instructions are given once right before the
next manoeuvre.
Medium
: Voice instructions are given once as the vehicle
approaches the next manoeuvre and it is repeated right
before the manoeuvre.
Verbose
: Voice instructions are given once relatively far from
the next manoeuvre, it is repeated as the vehicle approaches
the next manoeuvre, and it is repeated again right before the
actual manoeuvre.
Announce Route Summary*
You can select whether to have the navigation system announce
by voice a quick summary of the route whenever a route is
calculated.
Announce Country Info*
When you cross country borders, this navigation system can
read out information about the country you have just entered.
p
This function is not effective if the map coverage of your
navigation system is only one country (technically, there is
no country border data).
Announce Traffic Info*
You can select whether to have the navigation system announce
by voice the traffic information whenever a traffic incident on
your route is received.
p
This function will become effective when the contents are
ready for use in the future and the online traffic feature is
available.
Announce System Messages*
When a system message appears, this navigation system can
read out the message.
“Warnings” settings
Important
This system is able to warn you if you exceed the current
speed limit. This information may not be available for
your region (ask your local dealer), or may not be fully
correct for all roads on the map.
You are liable for ensuring that using this feature is legal
in the country where you intend to use it.
Speed Warning
Warn When Speeding
You can select whether you want to receive visible and/or
audible warnings.
The following alert types are available:
—
Audio and Visual
: When selected, audible and visible
warnings will go off when you exceed the speed limit.
—
Visual
: When selected, visible warnings will go off when
you exceed the speed limit.
—
Disabled
: When selected, no warnings will go off.
Speed Limit Always Visible
You can select whether you want to see the speed limit sign
on the map all the time. When you set the speed limit to
always be visible, the colour of the speed limit sign changes
when you exceed the speed limit.
Outside Cities: ***% of the Speed Limit
You can receive a warning when you reach the set percent-
age of the speed limit in rural areas.
Within Cities: ***% of the Speed Limit
You can receive a warning when you reach the set percent-
age of the speed limit in urban areas.
Alert Points
This setting allows you to receive a warning when approaching
alert points like school zones or railroad crossings.
Refer to
Setting the alert point warnings
on page 27
Warning Road Signs
Maps may contain driver alert information. Touch this key to turn
on or off these warnings and to set the distance from the hazard
to receive the warning at. These can be set individually for the
different warning types.
Calculates a route with the shortest travel time to your
destination as a priority. Usually the best selection for fast
and standard cars.
Easy
Results in a route with fewer turns and no difficult manoeu-
vres. With this option, you can make this system to take, for
example, the motorway instead of a series of smaller roads
or streets.
Short
Calculates a route with the shortest distance to your destina-
tion as a priority. Usually practical for slower vehicles. Rarely
practical to use to search for shorter routes for normal
vehicles regardless of the speed.
Economical
Calculates a route that is quick and saves fuel.
Navigation Mode
You can enable or disable off-road navigation.
On-road
The route is planned towards the destination along the roads
on the map.
Off-road
The route is planned towards the destination in a straight
line, not along the roads on the map.
Highways
When this function is turned off, the route is calculated prioritis-
ing the avoidance of motorways.
This function is useful when you want to avoid motorways when
you are driving a slow car or you are towing another vehicle.
Period Charge
When this function is turned off, the route is calculated prioritis-
ing the avoidance of toll roads.
This function is useful when you want to avoid toll roads with
restricted time access that require you to purchase a separate
pass or vignette to extend the length of time allotted for use.
p
This option can be enabled or disabled separately from the
pre-use toll road usage option.
Per-use Toll
When this function is turned off, the route is calculated prioritis-
ing the avoidance of per-use charged toll roads.
This function is useful when you want to avoid toll roads where
there is a per-use charge.
Ferries
When this function is turned off, the route is calculated prioritis-
ing the avoidance of ferries.
25
< CRB4783-A >
Customising preferences of the navigation
Customising preferences of the navigation
