Black plate (27,1)
After installing this product
1
Reconnect the negative (
–
) terminal of
the vehicle
’
s battery.
First, double-check that all connections are
correct and that this product is installed cor-
rectly. Reassemble all vehicle components
that you previously removed. Then reconnect
the negative (
–
) cable to the negative (
–
) term-
inal of the battery.
2
Start the engine.
3
Press the RESET button.
Press the
RESET
button on this product with a
pointed object such as the tip of a pen.
p
Some of the settings and recorded contents
will not be reset.
4
Change the settings as desired.
=
For details concerning operations, refer to
Operation Manual.
5
Drive down an unobstructed road until
the GPS starts receiving the signal nor-
mally.
Note
After installing this product, be sure to check at a
safe place that the vehicle is performing normal-
ly.
<CRB4352-A>27
Engb
27
Section
04
After
installation
After installation
Summary of Contents for AVIC-F60BT
