Pioneer AVIC-F220, Installation Manual, Page: 7 / 112

Connecting the system
We recommend connecting the supplied external aerial. Connect the aerial plug of your vehicle to the AV receiver di-
rectly
(Fig. 1)
.
If you do not use the supplied external aerial in order to split radio signal between this product and the built-in tuner of
the AV receiver
(Fig. 2)
, the radio sensitivity of the AV receiver may decrease.
26-pin cable (supplied)
3.55 m
2 m
GPS aerial
Green
Yellow
Base unit
RDS-TMC tuner
(supplied)
Not used.
Expansion port
30 cm
1 m
30 cm
AV receiver
Aerial jack of AV receiver
External aerial (supplied)
Aerial jack
Vehicle aerial
For more details about the wiring, refer to Wiring the external aerial on page 17.
(Fig. 1)
RDS-TMC tuner
AV receiver
Aerial jack of AV receiver
Vehicle aerial
Aerial jack
Aerial plug
(Fig. 2)
Note
The terminal form of the 26-pin cable may differ
depending on the terminal type of the AV receiver.
For details of connection, refer to the installation
manual supplied with the AV receiver.
Engb
7
English
Section
03
Connecting the system