Connecting the power cord (1)
ISO connector
*1
*3
*2
*4
Speaker leads
White:
Front left
White/black: Front left
Grey:
Front right
Grey/black:
Front right
Green:
Rear left
or Subwoofer
(*5)
Green/black: Rear left
or Subwoofer
(*5)
Violet:
Rear right
or Subwoofer
(*5)
Violet/black: Rear right
or Subwoofer
(*5)
Depending on the kind of vehicle, the function
of *2 and *4 may be different. In this case, be
sure to connect *1 to *4 and *3 to *2.
Connect leads of the
same colour to each other.
Yellow
(*2)
Back-up
(or accessory)
Red
(*4)
Accessory
(or back-up)
Yellow
(*1)
To terminal always supplied
with power regardless of
ignition switch position.
Red
(*3)
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
Orange/white
To lighting switch terminal.
Black (earth)
To vehicle (metal) body.
Note
Notes
·
When a subwoofer (*5) is connected to this
navigation system instead of a rear speaker, change
the rear output setting in the Initial Setting. (Refer to
Operation Manual.) The subwoofer output of this
navigation system is monaural.
·
When using a subwoofer of 70 W (2
Ω
), be sure to
connect with violet and violet/black leads of this
navigation system. Do not connect anything with
green and green/black leads.
Engb
10
Section
03
Connecting the System
