Black plate (15,1)
Checking part names and
functions
3 4
2
1
1
SD card slot
p
An SD memory card containing map
data is inserted at the factory.
p
Do not erase the map data stored on the
SD memory card (inserted at the factory).
Without the data, the navigation function
is disabled.
2
Video output selector switch
The switch is used to change the resolution
of video output to the AV receiver.
!
When the switch is set to the left,
WQVGA video is output.
!
When the switch is set to the right,
WVGA video is output.
3
Reset button
=
For details, refer to
4
Power indicator
Inserting an SD memory card
p
The included SD memory card must be in-
serted into the SD card slot for prior to
using the AVIC-F130 or AVIC-F250 for the
first time.
1
Insert an SD memory card into the SD
card slot.
2
Gently press the card in against the
spring latch until it stops, then release.
The card will lock firmly into place inside the
SD card slot.
<127075024473>15
Engb
15
Chapter
02
Intr
oduction
Introduction
