Black plate (16,1)
Resetting the microprocessor
CAUTION
Please refer to the related section before clearing.
The microprocessor must be reset under the
following conditions:
!
Prior to using this product for the first time
after installation.
!
If the product fails to operate properly.
!
If there appear to be problems with the op-
eration of the system.
!
When changing the combination of equip-
ment.
!
When adding/removing additional pro-
ducts that connect to the navigation sys-
tem.
!
If your vehicle position is shown on the
map with a significant positioning error.
%
Press the reset button on this product
with a pointed object such as the tip of a
pen.
Reset button
<127075024473>16
Engb
16
Chapter
02
Introduction