manualshive.com logo in svg

Pioneer AVIC-D1, Service Manual, Page: 214 / 276

Share
Download
Pioneer AVIC-D1 Service Manual Download Page 214

AVIC-D1/UC

214

1

2

3

4

1

2

3

4

C

D

F

A

B

E

6. GPS Self check

 

 

 • GPS receiving status will be displayed.
 • Conditions to move on to the next inspection.
       Antenna connection is OK.
       Data is received from one or more satellite.
       Time is being displayed.
 • When all the conditions are met, the background color will change to blue.
 • Only when all the conditions are met, you can move on to the next inspection by the [   ] key on the remote 
    controller.
It should be noted, however, that you will not be able to move on to the next inspection if there is an error 
(background color is red) even if the conditions are met.

   <Supplemental explanation regarding error display>

7. Software version

 
 • It indicates the version information of the software.
 • Conditions to more on to the next inspection.
     “GPS model” is “05UC DVD”.
     “Calibration check” is ”OK”.   OK : ”Setup touch panel effective range” in Testmode is done.
 • Only when all the conditions are met, you can move on to the next inspection by the [   ] key on the remote 
    controller.
It should be noted, however, that you will not be able to move on to the next inspection if there is an error 
(background color is red) even if the conditions are met.

6. GPS Self check

Using satellites NO.

01  02  03  04  05  06  07  08
Antenna connection
Receiving signal level
Latitude
Longitude

2004/11/24 15:00:00

OK

13.5

3D  35  55  47.1

139  28  30.0

[joy stick down] It progresses to the next inspection.

   Details of the error
This is an error when communication with DRAGON is not established.
Communication error due to a hardware problem could be the cause.
It is highly possible that the hardware on the DRAGON side is defective.
Time out error for response to BIOS call.
Communication error due to a hardware problem could be the cause.
It is highly possible that the hardware on the DRAGON side is defective.
This is an error when request is made while the data for response is not 
prepared (not obtained from DRAGON).
Communication error due to a hardware problem could be the cause.
It is highly possible that the hardware on the DRAGON side is defective.

   Displayed message
No connection to DRAGON

Command error

Invalid data

7. Software version 

System boot / OS version
Syscom version

Drive apl version
GPS program version
GPS model

0.17 / 0.17
6.10
6.01
4032
5.08  04/04/01  4.10
DVD  (0x29)

[joy stick down] It progresses to the next inspection.

Monitor ucom version

ver

05UC

Calibration check                          OK

Summary of Contents for AVIC-D1





















































































































































































































































































Reviews:

No comments