23
Installation
Parts supplied
When installing the antenna inside the car (on the dashboard or rear shelf)
Affix the metal sheet on as level a surface as possible where the GPS antenna faces outside
the window. Place the GPS antenna on the metal sheet. (The GPS antenna is fastened
with its magnet.)
Note:
• When attaching the metal sheet, do not cut it into small pieces.
• Some models use window glass that does not allow signals from GPS satellites to pass through. On
such models, install the GPS antenna on the outside of the car.
GPS antenna
Make sure the surface is
free of moisture, dust,
grime, oil, etc., before
affixing the metal sheet.
Note:
The metal sheet
contains a strong adhesive
and may leave a mark on
the dashboard if it is
removed.
Clamps
Use clamps to secure the
lead where necessary inside
the car.
Metal Sheet
Peel off the protective sheet
on the rear.
Waterproof pad
Clamp (5 pcs.)
Metal sheet
GPS antenna
ENG/MASTER 96
24
CRD3801A_inst_001_030_Eng 4/1/03 2:17 PM Page 24
