En
7
<CRD5002-A> UC
Connecting the system
This product
Antenna jack
Vehicle antenna
GPS antenna
Microphone
3.55 m (11 ft. 8 in.)
3 m (9 ft. 10 in.)
iDatalink adapter input
Please refer to the instruction
manual for the iDatalink adapter
(sold separately).*
Wired remote input
Please refer to the instruction manual for
the Hard-wired remote control adapter
(sold separately).
SiriusXM Connect Vehicle Tuner
Please refer to the instruction
manual for SiriusXM Connect
Vehicle Tuner
(sold separately).
WARNING
• To avoid the risk of accident and the potential violation of applicable laws, this product should never
be used while the vehicle is being driven except for navigation purposes. And, also rear displays
should not be in a location where it is a visible distraction to the driver.
• In some countries, the viewing of images on a display inside a vehicle even by persons other than the
driver may be illegal. Where such regulations apply they must be obeyed and this product’s video
source should not be used.
NOTE
* Before using and/or connecting the iDatalink Maestro adapter, you will need to first flash the Maestro
module with the appropriate vehicle and head unit firmware. You can find the device number that is
required for the activation on the followings (refer to Operation Manual.):
• the label on the packaging of this product
• the label on this product
• the “
Firmware Information
” screen
Summary of Contents for AVIC-5201NEX
Page 30: ...16Fr ...
Page 31: ...Fr 17 ...
