7
Inserting and ejecting an SD memory
card
8200NEX
7200NEX
p
This system is not compatible with the Multi Media Card
(MMC).
p
Compatibility with all SD memory cards is not guaranteed.
p
This product may not achieve optimum performance with
some SD memory cards.
Inserting an SD memory card
1 Press the button.
2 Touch
to open the LCD panel.
3 Insert an SD memory card into the SD card
slot.
4 Press the button.
Ejecting an SD memory card
1 Press the button.
2 Touch
to open the LCD panel.
3 Press the middle of the SD memory card gently
until it clicks.
4 Pull the SD memory card out straight.
5 Press the button.
Plugging and unplugging a USB stor-
age device
p
This product may not achieve optimum performance with
some USB storage devices.
p
Connection via a USB hub is not possible.
p
A USB cable is required for connection.
1 Pull out the plug from the USB port of the USB
cable.
2 Plug a USB storage device into the USB cable.
2
1
1
USB cable
2
USB storage device
p
Check that no data is being accessed before pulling out the
USB storage device.
On first-time startup
1 Start the engine to boot up the system.
The “
Select Program Language
” screen appears.
p
From the second time on, the screen shown will differ
depending on the previous conditions.
p
From the second time on, enter the password for the anti-
theft function if the password entry screen appears.
2 Touch the language.
3 Touch
.
The “
Smartphone Setup
” screen appears.
4 Touch the item.
Refer to
Information on the connections and functions for
each device
on page 35
5 Touch
.
The warning message screen appears.
6 Touch [
OK
].
The top menu screen appears.
On first-time startup of the naviga
-
tion system
When you use the navigation function for the first time, an initial
setup process starts automatically. Follow the steps below.
p
You can change the language later using [
Regional
] in the
“
Settings
” screen. Other settings can be restarted later
using [
Start Configuration Wizard
] in the “
Settings
”
screen.
1 Press the button.
2 Touch
or
.
3 Touch the language that you want to use on the
navigation screen, then touch [
Select
].
4 Read the terms carefully, checking the details,
and then touch [
Accept
] if you agree to the
conditions.
5 Touch [
Next
].
6 Touch the language that you want to use for
voice guidance messages, then touch [
Next
].
7 If needed, modify the unit settings, then touch
[
Next
].
8 If needed, modify the default route planning
options, then touch [
Next
].
9 Touch [
Activate
], then [
Next
].
A message saying that the connected online features are acti-
vated appears if you activate these services right away.
Refer to
“
Connected Services
” settings
on page 28
10 Touch the connected services you want to use,
then touch [
Next
].
The initial setup is now complete. The map screen appears and
you can start using the navigation system.
< CRB4817-A >
Basic operation
