When connecting with a rear view camera
When using this product with a rear view camera, automatic switching to video from a
rear view camera when the gear shift is moved to
REVERSE (R)
position is possible.
When connecting to a navigation unit, rear view mode also allows you to check what is
behind you while driving. For details, refer to the Operation Manual.
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY
RESULT IN INJURY OR DAMAGE.
CAUTION
•
The screen image may appear reversed.
•
The rear view camera function is to use this product as an aid to keep an eye on trailers, or backing into a
tight parking spot. Do not use this function for entertainment purposes.
•
The object in rear view may appear closer or more distant than in reality.
Fig. 4
<CRD3965-A> 8
ENG/MASTER 96 INST
7
Connecting the Units
You must use a camera
which outputs mirror
reversed images.
CAUTION
Connection method
Clamp the lead.
1.
2. Clamp firmly with
needle-nosed
pliers.
Fuse resistor
8 m
Extension lead (supplied)
rear view camera
Violet/white
Of the two lead wires connected to the back
lamp, connect the one in which the voltage
changes when the gear shift is in the REVERSE
(R) position. This connection enables the unit to
sense whether the car is moving forwards or
backwards.
RCA cable
(sold separately)
Note:
• It is necessary to set
B-CAM
to
ON
in
SET UP
when connecting the rear view camera.
15 cm
To video output
Rear view camera in
20 cm
