19
Chapter
44
Engb
7 Touch [Firmware Update].
The “
Firmware Update
” screen appears.
8 Touch [Continue] to display the
data transfer mode.
p
Follow the on-screen instructions to finish
updating the firmware.
p
This product will reset automatically after
the firmware update is completed if the
update is successful.
p
When the firmware update starts, the
source is turned off and the Bluetooth
connection is disconnected.
p
If an error message appears on the
screen, touch [
Continue
] to proceed and
start the recovery sequence.
Checking the connections of
leads
Check that the leads are properly connected
between this product and vehicle. Also
check whether they are connected in the
correct positions.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The “
System
” screen appears.
3 Touch [System Information].
4 Touch [Connection Status].
The “
Connection Status
” screen appears.
Illumination
When the headlights or small lamps of
the vehicle are on, “
ON
” is displayed.
When the small lamps of the vehicle are
off, “
OFF
” is displayed. (If the orange/
white lead is not connected, “
OFF
”
appears.)
Audio adjustments
Using fader/balance
adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
p
This function is available when “
Rear
Speaker
” is set to “
On
”.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The “
Audio
” screen appears.
3 Touch [Fader/Balance].
The “
Fader/Balance
” screen appears.
4 Touch the following keys to adjust
the front/rear speaker balance.
Moves towards the front.
Moves towards the rear.
Each time you touch the keys, the front/rear
speaker balance moves towards the front
or rear.
p
“
Front25
” to “
Rear25
” is displayed as the
front/rear speaker balance moves from
the front to rear.
p
The default setting is “
F/R 0 L/R 0
”.
p
Set “
Front
” and “
Rear
” to “
0
” when using
a dual speaker system.
5 Touch the following keys to adjust
the left/right speaker balance.
Moves towards the left.
Moves towards the right.
Each time you touch the keys, the left/right
speaker balance moves towards the left or
right.
p
“
Left25
” to “
Right25
” is displayed as the
left/right speaker balance moves from the
left to right.
p
The default setting is “
L/R 0
”.
p
You can also set the fader/balance by
dragging the point on the displayed table.
Using balance adjustment
You can adjust the balance between right/
left sound output.
p
This function is available when “
Rear
Speaker
” is set to “
Off
”.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The “
Audio
” screen appears.
3 Touch [Balance].
The “
Fader/Balance
” screen appears.
4 Touch the following keys to adjust
the left/right speaker balance.
Moves towards the left.
Moves towards the right.
Each time you touch the keys, the left/right
speaker balance moves towards the left or
right.
p
“
Left25
” to “
Right25
” is displayed as the
left/right speaker balance moves from the
left to right.
p
The default setting is “
L/R 0
”.
p
You can also set the fader/balance by
dragging the point on the displayed table.
Switching sound muting/
attenuation
You can automatically mute or attenuate the
AV source volume and the iPhone applica-
tion volume when the navigation outputs the
guidance voice.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The “
Audio
” screen appears.
3 Touch [Mute Level].
The pop-up menu appears.
4 Touch the item you want to set.
ATT
(default):
The volume becomes 1/10.
Mute
:
The volume becomes 0.
Off
:
The volume does not change.
Adjusting source levels
SLA
(source level adjustment) lets you
adjust the volume level of each source to
prevent radical changes in volume when
switching between sources.
p
Settings are based on the FM tuner
volume level, which remains unchanged.
p
This function is not available when the FM
tuner is selected as the AV source.
