Pioneer AVH-X6800DVD, Owner'S Manual

Page: 9 / 204

9
8
AUDIO
SUBTITLE
ANGLE
Changes the audio language, subtitle language
or viewing angle during DVD playback.
9 BAND/
ESC
Selects the tuner band when tuner is selected
as a source.
Cancels the control mode of functions.
Switches between media file types when play-
ing the data of Disc, USB.
10 RETURN Returns to the specified point and begins
playback from there.
11 Pauses or resumes playback.
or
For audio: Press and hold to perform fast
reverse or fast forward.
For video: Press to perform fast reverse or fast
forward.
or
Press to return to the previous track (chapter)
or go to the next track (chapter).
Press to answer or end a call.
Stops playback.
If you resume playback, playback will start from
the point where you stopped. Touch the key
again to stop playback completely.
12 FOLDER/P.
CH
Selects the next or previous disc or folder.
Recalls radio station frequencies assigned to
preset channel keys.
Notes on using the LCD panel
WARNING
 Keep hands and fingers clear of this product when
opening, closing, or adjusting the LCD panel. Be especially
cautious of children’s hands and fingers.
 Do not use with the LCD panel left open. It may result in
injury in the event of an accident.
CAUTION
 Do not open or close the LCD panel by force. It may cause
a malfunction.
 Do not operate this product until the LCD panel has
completely opened or closed. The LCD panel may stop at
that angle for safety.
 Do not place a glass or can on the open LCD panel.
Opening and closing the LCD
panel
The LCD panel will open or close automatically when the ignition
switch is turned on or off. You can turn off the automatic close/
open function.
 Do not close the LCD panel by force with your hands. That
will cause a malfunction.
 The automatic close/open function will operate the display
as follows.
— When the ignition switch is turned OFF while the LCD
panel is opened, the LCD panel will close after six
seconds.
— When the ignition switch is turned ON again (or turned to
ACC), the LCD panel will open automatically.
— Removing or attaching the front panel will automatically
close or open the LCD panel.

Protecting your unit from theft on page 7
 When the ignition switch is turned OFF after the LCD panel
has been closed, turning the ignition switch ON again (or
turning it to ACC) will not open the LCD panel. In this case,
press OPEN / CLOSE to open the LCD panel.
 When closing the LCD panel, check to make sure that it has
closed completely. If the LCD panel has stopped halfway,
leaving it like this could result in damage.
1 Press OPEN / CLOSE to open the LCD panel.
 To close the LCD panel, press
OPEN
/
CLOSE
again.
Setting the automatic open function
To prevent the display from hitting the shift lever of an automatic
vehicle when it is in the P (park) position, or when you do not
wish the display to open/close automatically, you can set the
automatic open function to manual mode.
1 Display the “ System ” setting screen.
2 Touch [
Auto Flap
].

On
(default): The LCD panel will open or close automatically
when the ignition switch is turned on or off.

Off
: You have to press
OPEN
/
CLOSE
to open/close the LCD
panel.
Turning the LCD panel
horizontally
When the LCD panel is upright and hinders the operation of the
air conditioner, the panel can be turned horizontally temporarily.
1 Press and hold OPEN / CLOSE to display the flap
menu.
2 Touch the flip down temporarily key to flip the
LCD panel down to the horizontal position.
Flips the LCD panel down to the horizontal posi-
tion temporarily.
 To return to the original position, press and hold
OPEN / CLOSE .
 The LCD panel returns to the original position
automatically, indicated with a beeping sound 10
seconds after operation.
Adjusting the LCD panel slide
position
You can adjust the LCD panel slide position so that the panel is
set back or forward.
1 Press and hold
OPEN
/
CLOSE
to display the flap
menu.
2 Touch the slide back key or slide front key to
move the LCD panel back and forth.
The LCD panel slides to the back.
The LCD panel slides to the front.
5
TRK (
/ )
button
Press to return to the previous track (chapter)
or go to the next track (chapter).
Press and hold to perform fast reverse or fast
forward.
Press to answer or end a call.
6
button
Press to display the top menu screen.
Press and hold to activate the voice recognition
function.
 Refer to Using the voice recognition func-
tion (for iPhone)
on page 17
7 OPEN /
CLOSE
button
Press OPEN / CLOSE to open the LCD panel.
To close the LCD panel, press OPEN / CLOSE
again.
8
button
9 Disc-
loading
slot
 Refer to Inserting and ejecting a disc on
page 10
10
RESET
button
 Refer to Resetting the microprocessor on
page 6
Remote control
6
4
a
b
c
1 2 3
7
8
9
5
1 Volume ( + / – )
2 MODE Press to switch between the Application screen
and the AV operation screen.
Press and hold to switch to the camera view
mode.
3 SRC Press to cycle through all the available sources.
Press and hold to turn the source off.
4 TOP
MENU
Returns to the top menu during DVD playback.
5
MENU
Displays the DVD menu during DVD playback.
6 Thumb
pad
Selects a menu on the DVD menu.
7 MUTE
9 < CRD4918-A >
Basic operation Basic operation