Pioneer AVH-X1690DVD, Owner'S Manual

Page: 29 / 64

Black plate (29,1)
Using fader/balance adjustment
Fader/Balance displays when Rear Speaker is
set to Full on the System Menu.
You can change the fader/balance setting to pro-
vide an ideal listening environment for all of the
occupied seats.
1 Press the home button to switch to the
home display.
2 Touch the audio function key to open the
audio menu.
3 Touch Fader/Balance on the audio func-
tion menu.
4 Touch or to adjust the front/rear
speaker balance.
Range: F 15 L/R 0 to R 15 L/R 0
#
Select F/R 0 L/R 0 when only using two speak-
ers.
5 Touch or to adjust the left/right
speaker balance.
Range: F/R 0 L 15 to F/R 0 R 15
Note
You can also set the fader/balance by dragging
the dot on the displayed table.
Using balance adjustment
Balance
displays when Rear Speaker is set to
Subwoofer on the System Menu. This setting
will allow you to adjust the balance between
right/left sound output.
1 Press the home button to switch to the
home display.
2 Touch the audio function key to open the
audio menu.
3 Touch Balance on the audio function
menu.
4 Touch or to adjust the left/right
speaker balance.
Range:
L 15
to
R 15
Note
You can also set the balance by dragging the dot
on the displayed table.
Using the equalizer
You can adjust the equalization to match the
car
’
s interior acoustic characteristics as de-
sired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list of
the equalizer curves.
Display Equalizer curve
S.Bass Super bass
Powerful
Powerful
Natural Natural
Vocal Vocal
Flat Flat
Custom1 Custom 1
Custom2
Custom 2
!
The equalizer curves for Custom1 and
Custom2 can be adjusted.
!
You cannot select Custom1 and Custom2
when using the auto-equalizer.
!
When Flat , no changes are made to the
sound. You can check the effects of the
equalizer curves by switching alternatively
between
Flat and another equalizer curve.
1 Press the home button to switch to the
home display.
2 Touch the audio function key to open the
audio menu.
3 Touch Graphic EQ on the audio function
menu.
#
You cannot select or adjust the equalizer curves
of Custom1 and Custom2 when using the auto-
equalizer.
4 Touch the desired setting.
S.Bass
—
Powerful
—
Natural
—
Vocal
—
Flat
—
Custom1
—
Custom2
Adjusting the 8-band graphic
equalizer
You can adjust the level of each band for the
equalizer curves.
!
A separate
Custom1
curve can be created
for each source. If you make adjustments
when a curve other than
Custom2 is se-
lected, the equalizer curve settings will be
stored in
Custom1 .
!
A
Custom2
curve that is common for all
sources can be created. If you make adjust-
ments when the
Custom2 curve is selected,
the Custom2 curve will be updated.
1 Press the home button to switch to the
home display.
2 Touch the audio function key to open the
audio menu.
3 Touch Graphic EQ on the audio function
menu.
4 Touch the desired setting.
S.Bass
—
Powerful
—
Natural
—
Vocal
—
Flat
—
Custom1
—
Custom2
5 Touch the table to adjust the level of the
equalizer band.
Range: +12dB to
–
12dB
Using the auto-equalizer
The auto-equalizer is an equalizer curve created
by auto EQ (refer to
Auto EQ (auto-equalizing) on
page 37).
You can turn the auto-equalizer on or off.
If you connect an optional microphone to this
unit, you can use this function.
1 Press the home button to switch to the
home display.
2 Touch the audio function key to open the
audio menu.
3 Touch Auto EQ to turn the auto-equalizer
on or off.
#
You cannot use this function if auto EQ has not
been carried out.
Using sonic center control
Sound that is suited for the listening position
can easily be created with this function.
1 Press the home button to switch to the
home display.
2 Touch the audio function key to open the
audio menu.
3 Touch Sonic Center Control on the audio
function menu.
4 Touch or to select a listening position.
Range:
Left 7
to
Right 7
English
Audio adjustments
29
Section
Audio adjustments
En
16
<CRB4291-A>29