Pioneer AVH-P7950DVD, Installation Manual

Page: 9 / 40

8
ENG/MASTER 96 INST
English
Español
Deutsch
Français
Italiano
Nederlands
PyÒÒÍËÈ
<CRD4229-A> 9
Fig. 4
WARNING
Violet/white
See the section “When
connecting with a rear view
camera”.
Note:
• The position of the parking brake switch depends
on the vehicle model. For details, consult the
vehicle Owner’s Manual or dealer.
Connection method
1. Clamp the lead. 2. Clamp firmly with
needle-nosed
pliers.
Light green
Used to detect the ON/OFF status of the parking brake.
This lead must be connected to the power supply side of the parking
brake switch.
Power supply side
Ground side
Black (chassis ground)
Connect to a clean, paint-free metal location.
Fuse (10 A)
Fuse (10 A)
Parking brake
switch
LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT
PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE
OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS
LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS
INJURY OR DAMAGE.
Fuse (4 A)
Blue/white
Connect to system control terminal of the
power amp or auto-antenna relay control
terminal (max. 300 mA 12 V DC).
Yellow
After making all other connections to this unit,
connect this to the positive
+
terminal of the
battery.
CAUTION
Attach a 20 A fuse immediately prior to
the battery. Also, use heat resistant
battery cable with more than 5 mm
2
sectional area.