Pioneer AVH-P7950DVD/CN5, Service Manual

Page: 105 / 258

AVH-P7950DVD/RC
105
5 6 7 8
5 6
7
8
C
D
F
A
B
E
[Touched coordinate verification]
[Outline]
■
The coordinate before correction and after correction at the time of pressing the touch panel are displayed for
coordinate verification.
Furthermore, the red "
+
" cursor can be moved by the key operaiont mentioned bellow, and the coordinate of
the cursor center is displayed.
16 "
+
" cursors in white are displayed at the location where a "
+
" cursor is displayed during the calibration inspection.
(Fixed display)
[Display specifications]
●
Each displayed coordinate is as follows.
The values under [Factory] are the corrected values in the Factory region and the values under [User] are
the corrected values in the User region.
• Position : X/Y coordinate of the "
+
" cursor (movable) is displayed.
Movable range is (0, 0)~(799, 479).
• Sampling : A/D value (X direction, Y direction) of the pressed point is displayed.
• AD Value : The coordinate (X direction, Y direction) of the A/D value of the pressed point corrected by
the reference value for A/D correction is displayed.
• Normalization : The coordinate (X direction, Y direction) after normalizing the A/D corrected coordinate
within the effective range is displayed. (0~255)
• Calibration : The coordinate (X direction, Y direction) which is the result of adding the correction
by calibration to the normalized coordinate is displayed.
●
Movable "
+
" cursor is displayed in red.
●
16 calibration points are displayed in white.
[Key operation specifications]
Operational description Main unit key Remote controller key
To top menu WIDE MENU_ENTER
Cursor up movement BAND/ESC
↓
Cursor down movement ATT
↓
Cursor left movement PGM
←
Cursor right movement DISP
→
Movable by the cross key(in red)
Fixed display(in white)