1 Touch A.MENU and SETUP and then
touch BACK UP CAMERA.
2 Touch
a
to turn rear viewcamera set-
ting on.
#
To turn rear view camera setting off, touch
b
.
3 Touch
c
or
d
to select an appropriate
setting for polarity.
Each time you touch
c
or
d
it switches be
tween the following polarity:
!
BATTERY
When the polarity of the con
nected lead is positive while the gear shift
is in
REVERSE (R)
position
!
GND
When the polarity of the connected
lead is negative while the gear shift is in
REVERSE (R)
position
Setting the clock
Use these instructions to set the clock.
!
When this unit is turned on, time is dis
played on the entertainment clock only.
(Refer to
Switching the background display
1 Touch A.MENU and SETUP and then
touch CLOCK ADJUST.
2 Touch
c
or
d
to select the segment of
the clock display you wish to set.
Each time you touch
c
or
d
it will select one
segment of the clock display:
Hour
Minute
As you select segments of the clock display
the segment selected will be highlighted.
3 Touch
a
or
b
to set the clock.
Each time you touch
a
it increases the se
lected hour or minute. Each time you touch
b
it decreases the selected hour or minute.
Notes
!
You can match the clock to a time signal by
touching
JUST
.
If the minute is
00
29
, the minutes are
rounded down. (e.g.,
10:18
becomes
10:00
.)
If the minute is
30
59
, the minutes are
rounded up. (e.g.,
10:36
becomes
11:00
.)
!
You can display the clock for eight seconds by
pressing
FLIP DOWN/CLOCK
when the LCD
panel is closed.
!
Even when the sources are off, the clock dis
play appears on the display.
Setting the automaticopen
function
To prevent the display from hitting the shift
lever of an automatic vehicle when it is in
P
(park) position, or when you do not wish the
display to open/close automatically, you can
set the automatic open function in the manual
mode.
1 Touch A.MENU and SETUP and then
touch AUTO FLAP.
Other Functions
En
93
Section
18
Other
Functions
