Pioneer AVH-P7490DVD, Owner'S Manual

Page: 129 / 176

VD
Setting Remote Control Code Type (REMOTE CODE SELECT)
When using this product with a Pioneer DVD player, set the remote code of the supplied
remote control to enable operation of this product only. There are two remote codes, CODE
TYPE A and CODE TYPE B. When using this product with an “XDV-P90” Multi-DVD
Player, select CODE TYPE B. When using this product with a DVD navigation unit, select
CODE TYPE A.
Precaution:
• When changing the code type, set the dipswitches of the remote control to the same setting.
(See page 141.)
• When using in combination with the “XDV-P90”, set the “XDV-P90” to the STAND ALONE
mode.
1. Switch to the third SET UP MENU to select
the “REMOTE CODE SELECT” .
“REMOTE CODE SELECT” is indicated in blue.
(For details, see page 115.)
2. Click the joystick.
Code type selection menu is displayed.
3. Move the joystick up/down to select the
desired code type.
The currently set code type is indicated the mark
“ ”. The code type selected with the joystick is
indicated in blue.
4. Click the joystick.
The selected code type is set.
Note:
• Pressing the RETURN button takes you back to the previous display.
128
Changing Initial Settings of DVD Player