Pioneer AVH-P5950DVD/XN/RC, Service Manual

Page: 93 / 193

AVH-P5950DVD/XN/RC
93
5 6 7 8
5 6
7
8
C
D
F
A
B
E
The data written are as follows.
Upper limit value and lower limit value of X.
Upper limit value and lower limit value of Y.
Adjustment OK information.
When the captured value is outside of the allowable range.
The data written is as follows.
Adjustment NG information.
[Key operation specifications]
Operational
description Remote controller
key
To TOP menu MENU_ENTER
2. Set up calibration
[Outline]
Touch the cursor [+] displayed on the screen. When correctly touched, the cursor will disappear, and the next
cursor will appear. Calibration is conducted by repeating this process 16 times. When the 17th point has been
finally touched, setting information for the 16 points and the normal ending information, total of 17 byte data,
are written into the EEPROM, and the screen returns to the TOP menu.
In the following cases, however, NG will be displayed without storing the EEPROM captured value.
When the menu is exited before touching the 17th point.
However, ’adjustment NG information’ (1 byte) is written into the EEPROM.
When writing into the EEPROM failed.
The transition of the state for the above described 16 points adjustment is outlined below.
TOP menu
16 points
adjustment in
process
16 points adjustment
completed
EEPROM writing
in process
OK (normal ending)
Adjustment error
EEPROM writing error
Press ENTER key
[ A . M E N U ]