Pioneer AVH-P5750DVD, Service Manual

Page: 112 / 212

AVH-P5750DVD/RC
112
1 2 3 4
1 2 3 4
C
D
F
A
B
E
Layer 0
selected
Layer 1
selected
EDC1
mode
ID
designation
EDC1 start
ATT
Layer 0
selected
Layer 1
selected
EDC2
mode
ID
designation
EDC2 start
ATT
F-close and F-search cannot be executed, unless LD-ON is set.
0000 0000 0000 0000
0100 0000
1103 0000
Layer0:10** ****
Layer1:11** ****
** ****: ID specification value
Layer0:20** ****
Layer1:21** ****
** ****: Present ID value
0000 0000
1003 0000
0100 0000
1103 0000
0000 0000
1003 0000
Layer0:10** ****
Layer1:11** ****
** ****: ID specification value
Layer0:20** ****
Layer1:21** ****
** ****: Present ID value
The track number designation is selected from the track numbers already prepared for selection.
Switching to cyclic operation is made at step ANGLE-, and the decision is finalized (entered) in step ATT.
For CD: Tracks 1, 4, 10, 11 and 32.
For DVD: Tracks 1, 4, 10, 11, 32, 64 and 100.
Method for designating an ID address:
• A number of digits are determined through commands RIGHT and LEFT. Numerical UP/DOWN operations are performed
through commands ANGLE- and ANGLE+. The decision is finalized (entered) with command ATT.
Error status from
DVD microcomputer Contents Display
0X50 Mecha. error No display
0X40 No disc No display
0X30 The temperature is abnormal Thermal Protection in Motion
0X20 Read error Error-02-XX
0XE2 Non-playable disc NON-PLAYABLE DISC
0X90 Different region disc DIFFERENT REGION DISC
0XFF Undefined error Error-FF
Error code of read error(Part of XX)
Error Code Contents Display
0X99 Data cannot read Please confirm the disc
0X80 The address cannot be found Please confirm the disc
0X90 Focus error Please confirm the disc
0X91 Spindle lock NG DVD is stopping because mechanism detected abnormality
0X92 Carriage home NG DVD is stopping because mechanism detected abnormality
0X93 FOK error Please confirm the disc
0X94 ID/Subcode cannot be read Please confirm the disc
0X95 High spindle rotation
0X96 Row spindle rotation DVD is stopping because mechanism detected abnormality
DVD is stopping because mechanism detected abnormality
0X98 TOC cannot be found Please confirm the disc
0X9A AV chip error DVD is stopping because mechanism detected abnormality
0X9B RecaveryNG(BE)
Play state error
Disc data error
DVD is stopping because mechanism detected abnormality
Display
Error Code List
RIGHT
ANGLE+
~
RIGHT
ANGLE-
~
[If F-close isn't executed within 9 seconds after LD-ON, it switches to LD-OFF automatically.
And even if F-search is executed within 9 seconds after LD-ON, it also switches to LD-OFF.]
Please carry out F-close after carrying out power-off at once and carrying out power-on again,
when carrying out F-close after performing F-search.
RIGHT RIGHT LEFT LEFT
0X9C
0X9D
0X9E Serface error
(Disc distinction is improper)