Setting up the DVD player
Setting the subtitle language
You can set a desired subtitle language. When
available, the subtitles will be displayed in the
selected language.
1
Display the Video Setup menu.
Refer to
Introduction of menu operations
2
Touch Subtitle Language on the
Video Setup menu.
A subtitle language menu is displayed.
3
Touch the desired language.
The subtitle language is set.
#
If you have selected
Others
, refer to
Notes
!
If the selected language is not available, the
language specified on the disc is displayed.
!
You can also switch the subtitle language by
touching the icon during playback. (Refer to
!
The setting made here will not be affected
even if the subtitle language is switched dur-
ing playback using
Subtitle
.
When you select
Others
A language code input display is shown when
Others
is selected. Refer to
1
Touch 0 to 9 to input the language
code.
#
To cancel the entered numbers, touch
C
.
2
Registering the code.
Registering the code.
Setting the audio language
You can set the preferred audio language.
1
Display the Video Setup menu.
Refer to
Introduction of menu operations
2
Touch Audio Language on the Video
Setup menu.
An audio language menu is displayed.
3
Touch the desired language.
The audio language is set.
#
If you have selected
Others
, refer to
Notes
!
If the selected language is not available, the
language specified on the disc is used.
!
You can also switch the audio language by
touching
Audio
during playback. (Refer to
!
The setting made here will not be affected
even if the audio language is switched during
playback using
Audio
.
Setting the menu language
You can set the preferred language in which
the menus recorded on a disc are displayed.
1
Display the Video Setup menu.
Refer to
Introduction of menu operations
2
Touch Menu Language on the
Video Setup menu.
A menu language menu is displayed.
3
Touch the desired language.
The menu language is set.
#
If you have selected
Others
, refer to
Note
If the selected language is not available, the lan-
guage specified on the disc is displayed.
Setting the multi-angle DVD
display
The angle icon can be set so it appears on
scenes where the angle can be switched.
<QRB3126-A/N>60
En
60
Section
15
Menu operations
Summary of Contents for AVH-P4300DVD
