Setting the FM tuning step
The FM tuning step employed by seek tuning
can be switched between 100 kHz, the preset
step, and 50 kHz.
%
Touch FM Step on the initial menu to
select the FM tuning step.
Touching
FM Step
will switch the FM tuning
step between 50 kHz and 100 kHz. The se-
lected FM tuning step will appear.
#
If seek tuning is performed in 50 kHz steps,
stations may be tuned in imprecisely. Tune in the
stations with manual tuning or use seek tuning
again.
Setting the AM tuning step
The AM tuning step can be switched between
9 kHz, the preset step, and 10 kHz. When
using the tuner in North, Central or South
America, reset the tuning step from 9 kHz (531
kHz to 1 602 kHz allowable) to 10 kHz (530 kHz
to 1 640 kHz allowable).
%
Touch AM Step on the initial menu to
select the AM tuning step.
Touching
AM Step
will switch the AM tuning
step between 9 kHz and 10 kHz. The selected
AM tuning step will appear in the display.
Clearing Bluetooth memory
(AVH-P3250BT only)
Important
Never turn the unit off while the Bluetooth mem-
ory is being cleared.
1
Turn the unit off.
Refer to
2
Display the system menu.
Refer to
Introduction of menu operations
3
Touch Bluetooth Memory Clear on the
system menu.
4
Touch Clear.
After selecting a desired item, a confirmation
display appears. Touch
OK
to delete the mem-
ory.
#
If you do not want to clear the selected mem-
ory, touch
Cancel
.
Updating Bluetooth connection
software
(AVH-P3250BT only)
This function is used to update this unit with
the latest software. For information on the soft-
ware and updating, refer to our website.
Important
Never turn the unit off and never disconnect the
phone while the software is being updated.
1
Display the system menu.
Refer to
Introduction of menu operations
2
Touch Bluetooth Software Update.
3
Touch Start to display the data transfer
mode.
#
Follow the on-screen instructions to finish up-
dating the software.
Displaying the Bluetooth
system version
(AVH-P3250BT only)
If this unit fails to operate properly, you may
need to consult your dealer for repair. In such
cases, you may be asked to specify the system
version. Perform the following procedure to
check the version on this unit.
1
Turn the unit off.
Refer to
2
Display the system menu.
Refer to
Introduction of menu operations
En
65
Section
13
Menu
operations
Menu operations
Summary of Contents for AVH-P3250BT
Page 1: ...Operation Manual DVD AV RECEIVER AVH P4250DVD AVH P3250DVD AVH P3250BT English ...
Page 94: ...En 94 ...
Page 95: ...En 95 ...