Pioneer AVH-A105DVD, Owner'S Manual

Page: 11 / 108

11
En
En
g
lis
h
You can tune into a station using PTY (Programme Type Identification) information.
NOTE
This function is available when the FM tuner is selected.
1
Touch .
2
Touch or to select the item.
The following items are available:
[News&Info], [Popular], [Classics], [Others].
3
Touch to start searching.
TIP
If you touch [Cancel], the searching process is cancelled.
The BSM (best stations memory) function automatically stores the six strongest
broadcast frequencies under the preset channel keys [1] to [6].
NOTES
• Storing broadcast frequencies with BSM may replace those you have already saved.
• Previously stored broadcast frequencies may remain stored if the number of frequencies stored has
not reached the limit.
1
Touch to begin search.
While searching, the six strongest broadcast frequencies will be stored under the
preset channel keys in the order of their signal strength.
1
Touch [Cancel].
Manual tuning
Seek tuning or non stop seek tuning
Releasing the key in a few seconds skips to the nearest station from the
current frequency. Keep holding the key for long seconds to perform,
performs non stop seek tuning.
Searches for a broadcast by PTY information (page 11).
Searching by PTY information
Storing the strongest broadcast frequencies (BSM)
To cancel the storage process
1
Press .
2
Touch then .
The system setting screen appears.
3
Touch [AV Source Settings].
4
Touch [Radio settings].
The menu items vary according to the source.
Radio settings
Menu Item Description
[Local]
[Off]
FM: [Level1] [Level2] [Level3] [Level4]
AM: [Level1] [Level2]
Local seek tuning allows you to only tune into
radio stations with sufficiently strong signals.
NOTE
The FM [Level4] (AM [Level2]) setting allows reception
of only stations with the strongest signals.
[FM Step]
[100kHz] [50kHz]
[AM Step]
[9kHz] [10kHz]
You can switch the seek tuning step for the FM
band, and the seek/manual tuning step for the
AM band.
NOTE
For the FM band, the manual tuning step is fixed to 50
kHz.
[Regional]*
[On] [Off]
Switches whether the area code is checked
during the Auto PI search.
[Alternative FREQ]*
[On] [Off]
Allow the unit to retune to a different frequency
providing the same station.
[Auto PI]
[On] [Off]
Searches for the same PI (Programme
Identification) code broadcast station from all
frequency bands automatically when the
broadcasting station contains RDS data.
NOTE
Even if you set to [Off], the PI search is automatically
performed when the tuner cannot get a good
reception.
[Alarm Interrupt]*
[On] [Off]
The alarm broadcast can be received from the
last selected frequency, interrupting the other
sources.
[TA Interrupt]*
[On] [Off]
Receives the traffic announcement from the last
selected frequency, interrupting the other
sources.