AVH-P4400BH/XUUC
61
5
6
7
8
5
6
7
8
C
D
F
A
B
E
[Coordinate inspection]
[Outline]
The coordinate before correction and after correction at the time of pressing the touch panel are displayed for
coordinate verification.
Furthermore, the red "+" cursor can be moved by the key operaiont mentioned bellow, and the coordinate of
the cursor center is displayed.
[Display specifications]
Fixed display
[Operation specification]
Operational description
Remote controller key
Return to top mene
1
Each displayed coordinate is as follows.
The values under [Factory] are the corrected values in the Factory region and the values under [User] are
the corrected values in the User region.
• Sampling
: A/D value (X direction, Y direction) of the pressed point is displayed.
• AD Value
: The coordinate (X direction, Y direction) of the A/D value of the pressed point corrected by
the reference value for A/D correction is displayed.
• Normalization
: The coordinate (X direction, Y direction) after normalizing the A/D corrected coordinate
within the effective range is displayed. (0~255)
• Calibration
: The coordinate (X direction, Y direction) which is the result of adding the correction
by calibration to the normalized coordinate is displayed.
16 calibration points "+" are displayed in white.
Summary of Contents for AVH-4400BT/XUEW5
Page 87: ...AVH P4400BH XUUC 87 5 6 7 8 5 6 7 8 C D F A B E ...
Page 88: ...AVH P4400BH XUUC 88 1 2 3 4 1 2 3 4 C D F A B E 9 2 EXTERIOR 1 A D E B B C A C ...
Page 97: ...AVH P4400BH XUUC 97 5 6 7 8 5 6 7 8 C D F A B E ...
Page 149: ...AVH P4400BH XUUC 149 5 6 7 8 5 6 7 8 C D F A B E F F PCB UNIT SERVICE SIDE B ...