Connecting a Bluetooth
audio player
(Function of AVH-P1400DVD)
A Bluetooth wireless connection can be estab-
lished by putting the unit into initiating a con-
nection mode.
%
Put the unit in initiating a connection
mode.
Refer to
37.
This unit is now on standby for connection
from Bluetooth audio player.
If your Bluetooth audio player is set ready for
Bluetooth wireless connection, connection to
this unit is automatically established.
Connecting to a Bluetooth
device automatically
(Function of AVH-P1400DVD)
If this function is set to on, a connection be-
tween your Bluetooth device and this unit will
take place automatically as soon as the two
devices are less than a few meters apart.
Initially, this function is set to on.
1
Touch Auto Connect to turn automatic
connection on.
Refer to
Introduction of Bluetooth telephone op-
If your Bluetooth device is ready for a
Bluetooth wireless connection, a connection
to this unit will automatically be established.
#
To turn automatic connection off, touch
Auto Connect
again.
2
Turn your vehicle
’
s ACC switch off and
on.
Once you turn your vehicle
’
s ACC switch on
again, a connection is established auto-
matically.
Displaying Bluetooth
Device address
(Function of AVH-P1400DVD)
This unit displays its Bluetooth Device ad-
dress.
%
Touch Device Information to display de-
vice information.
Refer to
Introduction of Bluetooth telephone op-
The Bluetooth Device address is displayed.
En
56
Section
14
Detailed instructions
