Introduction of Bluetooth
connection menu operations
Refer to
If you are using a cellular phone that can be
connected via Bluetooth wireless technology,
we recommend that you use your phone to
search for this unit and establish a connection
between it and your phone. The PIN code is
set to
0000
as default. The product name for
this unit will display on your phone as the de-
vice name. For details, refer to
code for Bluetooth wireless connection
72. For further details concerning the proce-
dures for establishing Bluetooth wireless con-
nections, refer to the instruction manual for
the phone.
Pairing from this unit
(Function of AVH-P4490BT/AVH-2490BT)
Connection
01: Phone1
02: Phone2
03: Phone3
1
Display the Bluetooth Connection
Menu.
Refer to
Introduction of Bluetooth telephone op-
2
Touch Connection to select a device.
3
Start to search.
Starting to search.
While searching,
is displayed and when
available devices are found, the device names
or Bluetooth device addresses (if names can-
not be obtained) are displayed.
#
If you want to switch between the device
names and Bluetooth device addresses, touch
the icon.
Switching between the device
names and Bluetooth device ad-
dresses.
#
To cancel searching, touch
Stop
.
#
If five devices are already paired,
Memory Full
is displayed and pairing cannot be
performed. In such cases, delete a paired device
first. Refer to this page.
#
If no device can be found,
Not Found
is dis-
played. In such cases, check the status of the
Bluetooth device and search again.
4
Touch a device name to select the de-
vice you want to connect to.
While connecting,
Pairing
is displayed. If the
connection is established,
Paired
is displayed.
!
6-digit number appears on the display of
this unit. Once the connection is estab-
lished, this number disappears.
#
If the connection fails,
Error
is displayed. In
such cases, try again from the beginning.
#
The PIN code is set to
0000
as the default, but
can be changed. Refer to
#
Once the connection is established, the de-
vice name is displayed.
Touch the device name to disconnect.
#
If you want to delete a paired Bluetooth tele-
phone, display
Delete OK?
. Touch
Yes
to delete
the device.
Deleting a paired device.
#
Never turn the unit off while the paired
Bluetooth telephone is being deleted.
Using a Bluetooth device to pair
(Function of AVH-P4490BT/AVH-2490BT)
<CRB3743-A/N>70
En
70
Section
12
Menu operations