14
CALIBRATION REMINDERS
*
Watch the pressure gauge, as the setting will vary with tractor’s electrical output, temperature
and other factors.
*Check your application rate by measuring product used against actual tons processed.
REMEMBER, ONLY YOU CAN CONTROL HOW MUCH PRODUCT IS APPLIED AND THAT WILL
DETERMINE IF YOUR CROP WILL KEEP!!!
ROUTINE SERVICE AND MAINTENANCE
1.
Clean the tip check and main strainer
every 10 hours of operation or more frequently if
required.
2. Although the pump can run dry, extended operation of a dry pump will increase wear. Watch
the inoculant level in the tank.
3. Cover the electronic cab control box on open station tractors if left outside.
4. Clean tank cap breather every 20 hrs or more frequently if required.
WINTER STORAGE
1. Thoroughly flush the system with water.
2. Remove the filter bowl and run dry until the water has cleared out of the intake side.
3. Drain all lines on the outlet side.
4. Never use oils or alcohol based anti-freeze in the system.
For spring start-up, or anytime the pump is frozen, turn off the power immediately to avoid burning the
motor out.
