29
A-407R
Amplifier Section
Continuous power output
(both channels driven at 20 Hz to 20 kHz)**
T.H.D. 0.06 %, 8
Ω
............................................. 45 W + 45 W*
T.H.D. 0.09 %, 4
Ω
............................................. 65 W + 65 W*
DIN Continuous power output (both channels driven at 1 kHz)
T.H.D. 1.0 %, 8
Ω
................................................. 60 W + 60 W
T.H.D. 1.0 %, 4
Ω
................................................. 90 W + 90 W
Total harmonic distortion**
20 Hz to 20 kHz, 20 W, 8
Ω
.......................................... 0.06 %*
•
Power output specification is for when power supply is
230V.
Input sensitivity/ impedance
PHONO (MM) ..................................................... 2.8 mV/ 50 k
Ω
CD, TUNER, LINE, TAPE 1/MD,
TAPE 2 MONITOR ............................................ 200 mV/ 50 k
Ω
PHONO (MM) overload level
1 kHz, T.H.D. 0.1 % ...................................................... 150 mV
Output level/ impedance
TAPE 1/MD, TAPE 2 MONITOR output
............................................................................. 200 mV/ 1 k
Ω
Frequency response
PHONO (MM) .................................... 20 Hz to 20 kHz
±
0.5 dB
CD, TUNER, LINE, TAPE 1/MD,
TAPE 2 MONITOR .............................. 5 Hz to 100 kHz dB*
Tone control
BASS ...............................................................
±
8 dB (100 Hz)
TREBLE ............................................................
±
8 dB (10 kHz)
Loudness contour (volume control set at – 30 dB position)
.............................................. + 5 dB (100 Hz)/ + 3 dB (10 kHz)
Signal-to-Noise ratio (IHF short circuit, A network)
PHONO (MM, 5 mV input) .............................................. 86 dB*
CD, TUNER, LINE, TAPE 1/MD,
TAPE 2 MONITOR ....................................................... 106 dB*
Signal-to-Noise ratio (DIN, continuous power/ 50 mW)
PHONO (MM) ..................................................... 71 dB/ 67 dB*
CD, TUNER, LINE, TAPE 1/MD,
TAPE 2 MONITOR ............................................. 95 dB/ 71 dB*
Power Supply/ Miscellaneous
Power requirements ......................... AC 220 - 230 Volts, 50/ 60 Hz
Power consumption
........................................................................................ 160 W
AC outlet(European model only)
Switched(x1) ....................................................................... 100W
Dimensions (including knobs and other protruding parts)
............................................... 420 (W)
×
335 (D)
×
128 (H) mm
Weight (without package)
......................................................................................... 6.9 kg
Accessories
Remote control unit ........................................................................ 1
Batteries (AA/R6P) ......................................................................... 2
Operating instructions .................................................................... 1
Power cord(Rated current 2.5 A) ................................................... 1
NOTE:
Specifications and design subject to possible modification without
notice, due to improvements.
*
Measured with the DIRECT button set to on.
**
Measured by Audio Spectrum Analyzer.
+0
- 3
8.4 SPECIFICATIONS
• ACCESSORIES
Î
+
2
7
3
1
¡
4
¢
7
3
_
+
STANDBY / ON
AMP
CD
TUNER
TAPE
TAPE
SELECT
TAPE
DECK
I
DECK
II
CD
DISC
SELECT
STATION
TUNER
CD
TUNER
PHONO
TAPE 1
TAPE 2
LINE
VOLUME
STEREO AMPLIFIER
REMOTE CONTROL UNIT
Power cord with fuse (ADG1156)
MV type
Batteries (AA/R6P)
(AEX-010)
Remote control unit
(CU-A013)
(AXD7164)
Power cord (ADG1154)
MY/EW and MY/GR types
