8
Preparations
a
Analog Audio Cable
Connect a playback device with an analog audio cable.
a
Analog Audio Cable
You can connect a turntable that has an MM-type cartridge
to the PHONO jack. Use an analog audio cable to connect a
turntable.
If the turntable has a ground wire, connect it to the SIGNAL
GND terminal. With some turntables, connecting the ground
wire may cause hum, in which case it should be
disconnected.
0
If the turntable has a built-in audio equalizer, connect it to
an LINE IN jack other than the PHONO jack. Also, if the
turntable uses an MC type cartridge, install an audio
equalizer compatible with the MC type cartridge between
the unit and the turntable, then connect to any LINE IN
jack other than the PHONO jack.
Connecting players (LINE IN
connection)
CD
a
a
Network Audio Player
Connecting players (Turntable
connection)
a
Turntable
SN29403412_A-10AE_En_1804XX.book 8 ページ ２０１８年５月１４日 月曜日 午前１１時３分
