3
REV-11 19, 12
Bath Accessories Installation
Determine the installation location for the bathroom hardware.
•
Drill 1/4” diameter hole approximate 15/16” apart. Place plastic an-
•
chors screws (B) into the drilled holes using hammer to tap it in flush
with the wall. Place the mounting plate (A) and secure them to the wall
with the help of mounting screws.
For 7AM030 & 7AM031 Install the mounting plate (A) 24-5/16” & 18-
•
5/16” apart respectively.
Secure the bathroom hardware with the screw at the bottom. Do not
•
overtighten.
For more care information or trouble shooting inquiries about your
Pioneer Product, please see the contact information on the back page.
