3
REV-01 25, 13
Faucet Installation
Clean the mounting surface If necessary.
•
For three hole installation
1.
:- Apply plumbers putty or sealant to the
bottom of the base gasket (E). Align the base gasket (E) on the mounting
surface and press into place. Remove excess plumbers putty. Slide the
deck plate (D) through the hoses underneath of the faucet. Insert the
faucet through mounting surface hole.
For single hole installation
2.
:- Note:- The faucet escutcheon is supplied
with rubber washer to form watertight seal. Do not use rubber washer
and plumbers putty both to form watertight seal. Slide the escutcheon
(H) to the faucet body (for 2LG250, 2MT250, 2GB250). Slide the washer
(I) through the hoses and place it under the escutcheon (H). Insert the
faucet through mounting surface hole.
