62
Using Performance Pads and Deck Pads
Saved Loop mode
You can save a loop to a loop slot in Serato DJ Pro and call up the saved loop.
•
You can also use the Performance Pads to control Saved Loop mode (page 52).
1 Press the [HOT CUE] button while pressing the [SHIFT]
button.
The unit switches to Saved Loop mode.
2 Press one of the [SLOT/PAD] buttons during loop playback.
Loops are assigned to the loop slots in Serato DJ Pro as follows:
3 Press one of the [SLOT/PAD] buttons assigned with a loop
while pressing the [SHIFT] button.
Loop playback starts from the beginning of the loop.
•
Press the [
SLOT/PAD
] button again to cancel loop playback.
Slot 1
Slot 2
Slot 3
Slot 4
