52
Using Performance Pads and Deck Pads
•
Normal playback continues with its original rhythm in the background during Loop
Roll playback, but you can’t hear this.
•
Release the Performance Pad to end the Loop Roll playback. Normal playback starts from
the exact point the track would have reached by then.
Saved Loop mode
You can save a loop to a loop slot in Serato DJ Pro and call up the saved loop.
•
You can also use the Deck Pads ([
SLOT/PAD 1, 2, 3, 4
] buttons) to control Saved Loop
mode (page 62).
1 Press the [SAVED LOOP] button.
The unit switches to Saved Loop mode.
2 Press a Performance Pad during loop playback.
•
Loops are assigned to the loop slots in Serato DJ Pro as follows:
3 Press a Performance Pad assigned with a loop while pressing
the [SHIFT] button.
Loop playback starts from the beginning of the loop.
•
Press the [
PARAMETER 1
] or [
PARAMETER 1
] button during loop playback to
change the length of the loop being played. The setting of the called-up loop is
overwritten with the changed setting.
•
Press the [
1/2X
] or [
2X
] button while pressing the [
SHIFT
] button during loop
playback to move a loop without changing the loop length. The setting of the called-
up loop is overwritten with the changed setting.
•
Press the Performance Pad again to cancel loop playback.
Slot 1
Slot 2
Slot 3
Slot 4
Slot 5
Slot 6
Slot 7
Slot 8
