4
Installation and connections
How to install
A speaker’s playback sound is delicately influenced by
conditions in the listening room. To produce optimum listening
conditions, take due consideration of the conditions of your
installation location before beginning actual installation.
•
Place the speakers at ear level.
•
For a natural stereo effect, the right and left speakers should
be installed in symmetrical and equidistant positions from the
listening position.
•
To prevent sliding, apply the supplied cushions to the bottom
of the speakers.
WARNING
Store small parts out of the reach of
children and infants. If accidentally
swallowed, contact a doctor
immediately.
D41-6-4_A1_En
•
The speakers should ideally be placed at an angle of 30° to the
left and right (for a total of 60°) from the listening position, and
facing inward.
60 °
VENTILATION CAUTION
When installing this unit, make sure to leave space around the
unit for ventilation to improve heat radiation (at least
15 cm at top, 15 cm at rear, and 15 cm at each side).
WARNING
Slots and openings in the cabinet are provided for ventilation to
ensure reliable operation of the product, and to protect it from
overheating. To prevent fire hazard, the openings should never
be blocked or covered with items (such as newspapers,
table-cloths, curtains) or by operating the equipment on thick
carpet or a bed.
D3-4-2-1-7b*_A1_En
Connections
•
Disconnect the power cord before making or changing
connections.
•
Read the instruction manuals for the devices you are going
to connect with the speakers.
•
Connect the power cord after all the connections are
complete.
•
Use the supplied power cord.
•
The input signals to the RCA, STEREO MINI and TRS input
terminals are mixed, so please beware of the volume level.
Connecting cords
Connect the supplied speaker cord to the speakers.
1 Strip about 1 cm of the head of the supplied speaker
cord and twist and remove the exposed insulator.
After removing the insulator, thoroughly twist the core wires.
2 Connect the supplied speaker cord to the speaker
terminals on the LEFT and RIGHT sides.
3 Insert the core wires into the terminals while pressing
the claw on the speaker terminal.
Connect the speaker cord with the red line into the + terminal
side (red) and the speaker cord without the red line into the -
terminal side (black).
Red +
Black -
The cord with the red line
