instruction manual for further ratings information before making connections to the product.
Replace Batteries Properly.
Replace batteries only with the proper type and rating specified.
Do Not Operate Without Covers.
Do not operate this product without the covers or panels.
Avoid Exposed Circuitry.
Do not touch exposed connections and components when power is present.
Do Not Operate With Suspected Failures.
If you suspect there is damage to this product, have it inspected by qualified service personnel.
Do Not Operate in Wet/Damp Conditions.
Do Not Operate in an Explosive Atmosphere.
Keep Product Surfaces Clean and Dry.
Safety Terms and Symbols:
Terms in This Manual.
These terms may appear in this manual.
WARNING.
Warning statements identify conditions or practices that could result in injury or loss of life.
CAUTION.
Caution statements identify conditions or practices that could result in damage to this product or
other property.
Terms on the Product.
These terms may appear on the product.
DANGER
Indicates an injury hazard immediately accessible as you read the marking.
WARNING
indicates an injury hazard not immediately accessible as you read the marking.
CAUTION
Indicates a hazard to property including the product.
Symbols on the Product.
These symbols may appear on the product: Attention refer to operation Instructions.
This instrument has double insulation.
Getting Started:
The current probe enables a general purpose oscilloscope to display AC and DC current signals up
to 100 amps Peak (70A RMS). The current probe can also make AC and DC measurements with a
multimeter by using the recommended accessory MT-246N (BNC-to-banana) plug adapter.
