This mounting bracket comes pre-configured in a low profile (Standard Wall Mount) installation mount. To
convert the mount to a long profile (Standard Ceiling Mount) configuration, please follow the diagram below.
Please note, this mount can use either configuration for wall or ceiling installations, the diagrams show are
the most typical configurations used.
Warning! There are small parts/screws used with this bracket that can be easily lost. Take care to insure
all parts are kept together and are accounted for. If any parts are lost or missing, please contact us for
replacements prior to installation.
Set Screws used are metric threading (M6 diameter). Do not use non-metric screws to prevent thread
Damage.
14mm
9/16”
7
6
5
Q
3
4
1
2
STANDARD CEILING MOUNT
C
1
STANDARD WALL MOUNT
A
Choose the mounting configuration needed for your application from the diagrams on
this page then continue to the next page.
Note: Over tightening the set screws may cause cross threading or stripped threads.
SPEAKER MOUNT CONFIGURATION ASSEMBLY
P. 2/4
Use the included wrench to remove the
nut holding the mount to the wall plate.
You can also use a 14mm socket wrench.
T
