JACKIE L
USER’S GUIDE
Edition 24. January 2022
22 / 28
Ev.n. 2-20220124-rev.10
PINNIUM
s.r.o., Za Pazdernou 2573, 397 01 Písek
CIN: 109 01 442 EU VAT No.: CZ10901442
6 SAFETY CONDITIONS
LEARN THE DEVICE AND ITS OPERATING PROCEDURES CAREFULLY.
FOLLOW ALL THE SAFETY INSTRUCTIONS
AND PRINCIPLES WHEN USING THIS PRODUCT!
6.1
SAFETY CONDITIONS
–
IN GENERAL
-
The tool may be used only by persons over 18 years of age.
-
It is strictly forbidden to make any modifications of the Tool or its parts.
-
Keep the Tool in good conditions during its operating life. Do not expose the Tool
to excessive temperatures, rain, frost or other adverse effects, that could adversely affect
the operation of the Lifting Tool.
-
Before each use of the Tool, check that some parts are not deformed, cracked
or damaged somehow. If so, do not use the Tool!
-
Use original spare parts for repairs only. By using non-genuine spare parts or parts not
approved by the manufacturer may result in personal injury to the Tool operator and will
violate the warranty.
-
This Tool was not designed to be used in the rain and wet conditions.
-
All persons, other than the operator, moving near to the lifting area are obliged
to maintain a sufficient distance to ensure their own safety.
-
Make sure that the load does not come into contact with other obstacles.
-
Do not place multiple loads on the Lifting Tool at once!
-
Do not allow the Tool to be damaged or put the health and lives of people in danger by
non-compliant behave with the principles of work safety.
-
Do not overload the Lifting Tool by placing heavier loads over the limit of the Lifting Tool.
-
Do not allow anyone to stand on the lifted load.
-
Do not leave the lifted load unattended. Finish the work first, secure the wall, only then
can you leave the work area safely.
-
Use the Lifting Tool for the purpose described in this manual only.
6.2
SAFETY CONDITIONS
–
BEFORE OPERATING
Ensure yourself before operating the Tool especially about:
-
The lifted load is properly secured against sliding, slipping or unwanted movement.
Especially in the lower part of lifted walls where the walls rests when lifted.
-
The sill is stable and working conditions are suitable.
-
Authorized persons to use the Tool knows well, how to operate it safely and they
are aware of the dangers and threats that can occur if the Tool is used incorrectly.
-
Children, unauthorized persons or animals do not have an access to the immediate
vicinity of the lifted load.
-
The tool is in good condition, ready to use, all components work properly and it is not
damaged in any way.
