WALL-MOUNTING:
1) There is an insert on the back of your Microburst speaker which will allow it to attach
to a standard (1/4” shaft) pivoting wall mount bracket. Contact your dealer for further
details. Follow the bracket manufacturer’s mounting instructions.
2) A flush, wall mounting option is also available using the keyhole on the back of the
speaker. The instructions below are written for rooms of standard construction, which
include most residential and business office environments. Such environments are
typically constructed with wooden studs behind the walls that will securely accept the
enclosed screws. If you cannot or do not want to mount into a stud, use the enclosed
wall anchors or consult with your local hardware store for your best mounting options.
Tools Required:
#2 Philips head screwdriver bit or hand screwdriver
Drill (electric or cordless)
1/8" bit (or 1/4” if not mounting into a stud)
Stud Finder
INSTRUCTIONS:
1) Determine where you want to mount your speaker and then, using the stud
finder, find the closest stud. If this location is not acceptable you will need to use
the enclosed wall anchors to mount the speaker where there is no stud.
2) Mark a spot on the wall at the desired mounting location.
3) If mounting into a stud: Drill a 2" deep pilot hole with an 1/8” bit at the marked spot.
Screw the mounting screw into the hole.
4) If not mounting into a stud: Drill a 2” deep pilot hole with a 1/4” bit at the marked
spot. Insert a wall anchor into the hole until it is flush with the wall (this may require
gently tapping it with a hammer), then screw the mounting screw directly into it.
5) Be sure the screw is inserted straight (perpendicular with wall and parallel with
floor). Leave the screw sticking out from the wall ~3/8”.
6) Hang the speaker on the screw head.
That’s it. Enjoy!
MB2000 & MB3000 SPECIFICATIONS:
Features:
Nylon reinforced cabinetry
Hardware in place for wall mounting
Gold plated binding posts
Automatic Overload Protection Circuit
Video Shielded
7 Year Transferable Warranty on parts & labor
Designed in the USA
System Type:
MB2000 Satellite: 2-Way, 2 element, Acoustic Suspension
MB3000 Center: 2-Way, 3 element, Acoustic Suspension
MB2000 Satellite Component Drivers:
1" liquid cooled Mylar dome tweeter
3" polymer cone woofers with butyl surrounds
MB3000 Center Component Drivers:
1" liquid cooled Mylar dome tweeter
(2) 3" polymer cone woofers with butyl surrounds
Frequency Response: 120 - 20 kHz (+/- 3 dB)
Crossover Frequency: 4 kHz
System Power: 200 Watts
Sensitivity: 88 dB @ 1 Watt / 1 Meter (2.83 Volts Pink Noise)
Nominal Impedance: 8 Ohms
Dimensions:
MB2000 Satellite: 3 7/8" Wide x 6 3/4" High x 4 1/8" Deep (with grill)
MB3000 Center: 10 1/4" Wide x 4" High x 4" Deep (with grill)
Cabinet Construction: Structurally reinforced nylon / plastic extrusion
Weight:
MB2000 Satellite: 5 lbs. per pair
MB3000 Center: 4 lbs. each
