Pinnacle Technology PP7MX, Command Manual

Page: 25 / 33

23
(39)

GS P x y Set basic calculated pitch
Format: ASCII GS P x y
Hex 1D 50 x y
Decimal 29 80 x y
Range: 0
≤
x
≤
255, 0
≤
y
≤
255
Initial value: x = 180, y = 360: EPSON targeted model print head 180 DPI
x = 203, y = 203: EPSON targeted model print head 203 DPI
Description:
Sets the horizontal basic calculated pitch to approximately 25.4/xmm [(1/x) inch], and the vertical basic
calculated pitch to approximately 25.4/ymm [(1/y) inch].
x = 0: Returns the horizontal basic calculated pitch to its default value.
y = 0: Returns the vertical basic calculated pitch to its default value.
Note:
●
Horizontal direction refers to the vertical direction in reference to paper feed; Vertical direction refers to the
direction of paper feed.
●
With standard mode, use the parameters shown below regardless of the direction of the characters (upside
down, or rotated 90 degrees).
a. Commands using x: ESC SP, ESC $, ESC \, FSS, GSL, GSW
b. Commands using y: ESC 3, ESC J, GSV
●
With page mode, use the parameters shown below according to the direction of the characters.
a. If the starting point is upper left or lower right using ESC T (Character print direction selection in page
mode) (feeds paper and expands characters in the vertical direction):
Commands using x: ESC SP, ESC $, ESCW, ESC \, FSS
Commands using y: ESC3, ESCJ, ESCW, GS$, GS\, GSV
b. If the starting point is upper right or lower left using ESC T (Character print direction selection in page
mode) (expands characters in the paper feed direction):
Commands using x: ESC 3, ESC J, ESCW, GS $, GS \
Commands using y: ESC SP, ESC $, ESCW, ESC \, FSS, GSV
●
This command has no affect on any previously set setting values.
●
If the calculation combining other commands results in fractions, the pitch is corrected to a minimal
mechanical pitch and the rest is discarded.
Reference: ESC SP, ESC $, ESC 3, ESC J, ESC W, ESC \, GS $, GS L, GS V, GS W, GS \
(40)

①
GS V m
②
GS V m n Select paper-cut mode and cutting paper
Format:
①
ASCII GS V m
Hex 1D 56 m
Decimal 29 86 m
②
ASCII GS V m n
Hex 1D 56 m n
Decimal 29 86 m n
Range:
①
m = 0
，
48
，
1
，
49
②
m =65
，
66
，
0 ≤n ≤255