21
Step 5:
Assemble the front wall panels
Place part S86 (sheet) on the worktable. Slide in 2 x Part ZZ04 and 1 x Part ZZ05 (jamb) into the top of the sheet and fix with the self-
tapping screws provided. You will need to drill holes through the sheet using a 3mm drill bit to fix the jambs as per diagrams below.
Please note: Drill holes from the
inside of the sheet through the
pre-drilled holes in the jambs to
ensure holes line up.
Then fix jambs from the outside
of sheet ensuring the jambs are
on the inside of the sheet.
Back
ZZ04
ZZ04
ZZ05
S86
