7
Step 2:
Assemble the rear wall panels
For easier assembly of your garden shed use sawhorses with timber studs as per diagram below (timber needs to be the same length
as the shed panels (1.5 M)) or alternatively, use a trestle table.
Place 2x part 14N (sheets) on your worktable and join together with the self-tapping screws as per the diagram below.
Now fit parts 20B (top channel) and 20C (bottom channel) onto the sheeting by tapping it in (diagram A) or sliding it in (diagram B).
Make sure the small lip of the channel is always facing out. This ensures water cannot build up inside your garden shed.
RIDGES FACING UP
A
ROOF TOP EDGE
