background image

A

About Your New Vehicle    │    1

Specification

 Non-rechargeable batteries are not to be recharged.

 If removable rechargeable batteries are used, the are only to be charged under adult supervision.

 Remove rechargeable batteries from the product before charging.

 Do not mix old and new batteries. Do not mix different types of batteries: alkaline, standard 

(carbon-zinc) or rechargeable (nickel-cadmium). 

 Insert batteries as indicated inside the battery compartment, anode to anode, cathode to cathode.

 Remove batteries during long periods of non-use. Always remove exhausted batteries from the 

product. Battery leakage and corrosion can damage this product. Dispose of batteries safely. 

 Never short circuit the battery terminals.

BATTERY INFORMATION

“Mercedes-Benz”,            ,         and the design of the enclosed 
product are subject to intellectual property protection owned by 
Daimler  AG.  They  are  used  by  Pinghu  City  Xiao  Ming  Xing 
Children's Products CO.,LTD 

Suitable age: 

Charge time: 

Load capacity:  

Size of car: 

Speed: 

3+ Years

8-12 hours

Under 50 kg

140 x 76.2 x 64.3 cm

2-8 km/h

2WD

4WD

4WD

Battery
Charger
input
Motor

12V7AH X1

12V1000mA

550-12000

12V7AH X2

12V1500mA

550-10000

12V10AH X1

12V1000mA

550-10000

Depend on local voltage

Summary of Contents for Mercedes-Benz GLC 63 S

















Reviews: