B
A
C
E
D
WARNING:
RISK OF ELECTRICAL SHOCK.
TO AVOID ELECTRICAL SHOCK, MAKE SURE TO TURN
OFF THE MAIN POWER SOURCE OR DISCONNECT POWER
DURING THE INSTALLATION OR SERVICE
OF THIS PRODUCT
ASSEMBLY INSTRUCTIONS: SKU# 27100098, ITEM# CL-TWL20K | 20,000LM DUAL HEAD LED WORK LIGHT WITH TRIPOD
HARDWARE:
A: Twin head work light with 6ft ground cord
B: Support Bracket
C: 57” Max height tripod
D: Hardware: 7-star knobs, 4-star knobs already installed on
each light head
E: Power Cord Attachment
ASSEMBLY:
STEP 1:
Attach twin light head (A) on the support bracket (B) by using
2-star knobs (D).
STEP 2:
Loosen the locking knob on the tripod (C) and pull legs away
from the center pole until all legs are fully extended. Re-tighten
the locking knob firmly.
STEP 3:
Place the power cord attachment (E) on top of the tripod. Use
1-star knob (D) provided in the hardware packet to attached twin
work light head and the support bracket onto the tripod (C).
STEP 4:
Extend the tripod from 3 to 5 feet. Unlock locking collars by
twisting counterclockwise. Lift the pole up to desired height.
Twist clockwise to re-lock the locking collar.
NOTE: Do not overextend the tripod pole. If at any time product does not seems secure or sturdy, make sure
that the tripod pole is not extended too far and that the tripod base is fully extended to support the weight
of the product.
NOTE: Make sure the portable light bar is connected completely to the locking tabs on the tripod stand. Lift
the portable handle to confirm. Failure to complete this step may cause damage to the light and/or injury.
EYES:
• DO NOT look directly at the LED lights.
• DO NOT remove the LED lights protective covering.
If you have questions or missing parts, please contact our customer care at 1-888-745-4837
CARE FOR YOUR PRODUCT:
This product has a two-year warranty from the date of purchase—this guarantees against failure due to factory defects, whether caused by materials or
workmanship. The warranty is non-transferable and only pertains to the original purchaser. Proof of purchase is required for any repair or replacement, so
please keep your proof of purchase receipt. This warranty does not cover normal wear and tear or damage due to misuse. Misuse of this product includes
but is not limited to:
• Using outdoors in extreme weather conditions.
• Opening the product’s housing.
• Any attempts to update, remodel or fix the unit yourself.
