Page 3
Manual Reference No. F 2233 M001
Issue 2.0
6.
For all AC powered equipment, including equipment powered by a plug top supply, the means of disconnection from
the mains is by removing the mains lead from the wall outlet socket. This wall outlet socket must be close to the
equipment, and must be easily accessible. Alternatively if the equipment has an IEC320 connector in its enclosure,
then either end of the cable can be considered to be the means of disconnection.
7.
For all DC powered equipment, the power source must be a SELV supply as defined by EN 60 950. The means of
disconnection from the supply is using the power connector on the enclosure.
8.
For equipment that is DC input powered, the DC supply must have a SELV output, i.e. the supply must have double
or reinforced insulation between its primary and secondary circuits.
Similarly if the equipment is supplied from a site battery, the DC charger for the site battery supply must have a SELV
output.
Note that batteries constitute an energy hazard if more than 250VA continuos power is available, or a stored energy
level of more than 20J. Use appropriate external fuses
9.
Unless otherwise specifically stated in the equipment installation manual, all data and control ports are connected to
SELV conformant circuits inside the enclosure. To maintain all the ports on the equipment at SELV, it is essential that
if any connection is made to any of these ports by other equipment, the other equipment must maintain its relevant
port at SELV.
10.
Data and control cables must be installed in conformance with ECMA-97.
Return Product Procedure
If a product is suspected of being faulty, discuss the problem with Pinacl Technical Support. If the product needs to be
repaired, contact the vendor for a Return Product Repair number and agree the return process with the vendor.
All returns direct to the manufacturer must have a Returns Authorisation Number available from phone 01745-589203 or
fax 01745-589351.
Support and Advice
Should customers experience difficulty either during installation or operation of this equipment, they are first asked to
ensure that all advice given in this manual has been followed.
If, having checked the advice given problems are still encountered then please contact the
Customer Help Line
for
support:
Tel: +44 (0)1745-589200
Disclaimer
Pinacl Communication Systems Limited makes no representation or warranties with respect to the contents hereof and
specifically disclaims any implied warranties or merchantability or fitness for any particular purpose. Further, Pinacl
Communication Systems Limited reserves the right to revise this publication and make changes from time-to-time in the
content hereof without obligation of Pinacl Communication Systems Limited to notify any person of such revision or
changes.
Copyright
2000, Pinacl Communication Systems Limited. All rights reserved. All Pinacl products are trademarks or
registered trademarks of Pinacl Communication Systems Limited. Other brand or product names are trademarks or
registered trademarks of their respective holders.
