3.2
Factory Reset
(For all PGD 718 and PGD 728 that has not been paired with smartphones)
3.3
Display keypad switch
Restore the smart lock to factory default setting. Use a stick-like object such as a clip,
toothpick etc. to push the reset button at the back panel of the smart lock for about 2
seconds. After that, you will hear a beep. The display keypad will play the boot animation
and the smart lock is now restored to factory default setting and all the data previously
programmed would be deleted. For model 728, please follow the steps on App User
Manual.
The exterior display keypad can be locked and turned off using the display keypad
switch at the back panel of the smart lock. With the display keypad switched off,
people outside cannot input passcode to unlock the door.
报警功能开启状态
OK
Alarm mode ON
报警功能开启状态
Alarm mode ON
Input passcode to disarm
报警功能开启状态
Successfully disarm.
Alarm mode OFF
报警功能开启状态
Successfully disarm.
Alarm mode OFF
Press and hold any two circles on the screen
for 1.5 second, the circles you pressed will
flash and you will hear a long BEEP.
Press and hold any two circles
on the screen for 1.5 second,
the circles you pressed will flash
and you will hear a long BEEP.
Note:
The default passcode is 123456.
Note:
When PGD728 APP is enabled, the RESET, PROG will be disabled
and controlled by APP.
9
Summary of Contents for PGD718
Page 24: ......
