Step 4
Now the two half arches (A) are joined together.
To do this, place the two bent stainless steel tubes
on the screwed-on foot sections (B).
Step 5
Now push the two half arches (A) together so that
the two plates with the 2 drill holes fit exactly to-
gether. Insert the 2 screws (C) through the holes
of the two plates and screw on the nuts (C). Now
tighten both half arches very tightly with the 13
mm spanner (D).
A
A
A
A
C
C
Stainless steel care
Use and Safety Instructions
Recommended:
Stainless steel is the modern material of our time,
hard-wearing, robust and easy to clean. Clean
stainless steel pipes only with a non-abrasive clea-
ning agent. Often a strong rubbing with a soft,
clean cloth is sufficient. Water with dishwashing
detergent removes almost any dirt. For intensive
care we recommend „Stainless Steel Polish“ from
Starbrite.
Read the manual before use and keep it for further
questions. For safety reasons, set up the stand with
2 adults. The stand must be set up at ground level,
on a solid floor that does not give way. Regularly
check the technical parts. Weight load LAZY 250kg
TÜV-tested.
Unsuitable:
Do not use abrasive substances as they scratch the
surface. Chrome, silver, brass care products are not
suitable, as they dissolve oxides. Furniture polis-
hes and other „shiners“ are also unsuitable as they
form a wax film. Metal sponges or iron wool (often
black metal) are not suitable, as they scratch the
surface and leave rusting iron particles.
The hammock stand is not a rocking stand. Strong
rocking is transferred to the stand attachments
and can cause damage. These are excluded from
the warranty because of incorrect use. Children
should only use the hammock in the presence of
adults and should not be left unattended.
