Pima TD-600/SAT-6, Installation Manual, Page: 9 / 12

Programming the SAT-6
9
Auto test

enter the time of the day in HH:MM format, for sending test reports


enter an interval for the test reports in HH:MM format (in
addition to the time of the day)

Report codes
The default “FF” codes can be used with the following formats: ContactID, PAF, and NPAF. All
other formats require specific other than “FF” codes.
The codes are hexadecimal: 0 - 15 and A-F (press repeatedly to enter a character).
The default codes are listed in the following table:
Code Event
Z1, Z2... Z6 Alarm in zones 1-6.
RS1, RS2... RS6 Restore codes for zones 1-6.
Zone Fail Zone fail
AC/RESTR AC fault/Restore
LB/RESTR Low battery/Restore
PF/RESTR Low PCB voltage (less than 9V)/Restore. Check the battery!
PH/RESTR Telephone fault/Restore
TST Test report
PNC Panic code
FUS/RESTR Zone voltage fault/Restore
ONG/OFG Arm/disarm using a code other than a user code
ON1-8/OFF1-8 Arm/disarm using user codes 1-8
BPS/RST Zone bypassed/Restore
Auto test hour
0 :0
ENTR
Auto test time
0 hr. 0 min
ENTR

Technician code
 
Report codes <R>
ENTER/NEXT/END
 
Report codes <R>
RS1:FF RS2:FF

Report codes <R>
Zone Fail: FF

Report codes <R>
AC:FF RESTR:FF

Report codes <R>
LB:FF RESTR:FF

Report codes <R>
LB:FF RESTR:FF

Report codes <R>
PF:FF RESTR:FF

Report codes <R>
PH:FF RESTR:FF

Report codes <R>
TST:FF PNC:FF

Report codes <R>
FUS:FF RESTR:FF

Report codes <R>
ONG:FF OFG:FF

Report codes <R>
ON1:FF OF1:FF

Report codes <R>
BPS:FF RSR:FF

Report codes <R>
ENTER/NEXT/END

Select:
CPTN XX en 6.10 Report codes <P>
ENTER/NEXT/END
ENTR
Report codes <R>
Z 1:FF Z 2:FF
ENTR ENTR
ENTR ENTR ENTR
ENTR ENTR ENTR
ENTR ENTR ENTR
ENTR ENTR ENTR