DPU-N Installation Guide
2
Connection Options
To program the Radio Transmitters:
1.
Connect the DPU-N unit into a USB port on COMAX’s PC or laptop
2.
Connect the telephone cable (RJ11) between the two connection boxes
3.
Connect the Molex plug into the transmitter
To program the PRG programmers:
1.
Connect the DPU-N unit into a USB port on COMAX’s PC or laptop
2.
Connect the telephone cable (RJ11) between the connection box and the PRG
How to set the DPU-N in COMAX
To use the DPU-N in the COMAX, do the following:
1.
Connect the DPU-N according to the desired device and the connection options on the
previous page
2.
In COMAX, go to
Tools
Settings
3.
Click the
Direct
tab
4.
Select
DPU-N
from the drop-down list
5.
Click
OK
6.
Open the desired device and program it. See the instructions in the COMAX guide.
This document may not be duplicated, circulated, altered, modified, translated, reduced to any form or otherwise changed;
unless PIMA’s prior written consent is granted.
All efforts have been made to ensure that the content of this manual is accurate. Pima retains the right to modify this
manual or any part thereof, from time to time, without serving any prior notice of such modification.
Please read this manual in its entirety before attempting to program or operate your system. Should you misunderstand any
part of this manual, please contact the supplier or installer of this system.
Copyright
2015 by PIMA Electronic Systems Ltd. All rights reserved
PIMA Electronic Systems Ltd.
5 Hatzoref Street, Holon 5885633, Israel
Tel: +972.3.6506414
Fax: +972.3.5500442
Email:
Web:
Summary of Contents for DPU-N
Page 7: ......
